Name — the label for the gateway, which is filtered in numerical then alphabetical order

Device Type — the gateway model

Location — the name of the assigned location where the asset was initially configured

Active Alarms — this area will be blank if there are no active alarms, but if there are active alarms you will see the alarm type and severity

Device ID — the 20-digit code assigned to the gateway

Last Activity — the date and/or time the gateway status was last reported

Battery Level — hovering over the icon will display the battery percentage and the icon will change from green to red as the battery life decreases

Signal Strength — the green icon indicates a high signal, the yellow icon indicates a medium signal, and the red icon indicates a low signal
​

Navigate to app.smartsense.co and log in using your SmartSense credentials.
​

You should now be on the home screen (dashboard). If your organization has more than one location/site, you will need to switch to the correct location/site by selecting the dropdown arrow in the top left corner of the home screen and entering the name of the location/site.
​

לחלופין, לחצו על כפתור ההיררכיה כדי להציג חלון מודאלי שבו תוכלו לסנן לפי שם או מספר כדי לבחור את הקבוצה/הרמה.
​

​

Select the gateways tab then select the gateway name to view the gateway's details.
​

בדף זה, תראו את סטטוס האירוע בפינה הימנית. אם אין אירועים, הסמל יהיה ירוק ויציג "אין אירועים". אם יש אירוע, הסמל יהיה אדום, ומספר האירועים יוצג בפינה הימנית.
​

If you select the incident card, a modal window will appear with additional details and actions that you can take to manage the incident. When an incident is acknowledged, the box turns green and displays a checkmark. The default status of the incident will always be new, but selecting the dropdown allows you to modify the status.
​
You can also select the assign to dropdown to choose a user from your SmartSense account to manage the incident.
​

Selecting corrective actions will give you the option to choose from a list of corrective actions to apply to the incident. Any changes you make will display under the history section.
​

Note: Selecting view incident details at the bottom of the card will take you to the incidents tab (you can learn more about this under Incident Management).
​

The next section on this screen is the gateway history. Any incidents that have occurred will display here and clicking on the incident ID will display the incident card with additional details. If you wish to filter the data, click the dropdown in the right corner to switch from All History to Notes, Incidents, Maintenance, or Replacements.
​

The last section on this page is alarms configured. If you have alarms configured, you may see active alarms if a gateway report is missed, there is an external power loss, etc.
​

בחירת ההתראה עבור האזעקה תציג חלון מודאלי הכולל את הסף, השהיית האזעקה, מיקום, אישור וחומרה בפינה הימנית העליונה. ניתן לסגור את החלון המודאלי על ידי בחירת ה-"x" בפינה הימנית.
​

If you wish to modify an existing alarm, you can select the edit or delete icons or toggle the alarm off. If you wish to add a new alarm, select + new alarm, fill out the required fields, then select save.
​