דלג לתוכן הראשי

איפוס שער BZ וכיבוי והפעלה מחדש

BZ Gateway.png

Soft reset BZ gateway

  1. Press and hold the power button (located on the side of the gateway).

  2. Keep holding until a white LED illuminates for approximately 5 seconds, then release.
    ​

    Note: You will need to hold the power button for 20+ seconds!

  3. Monitor the LED activity for the next 30-45 seconds, ensuring you see LED lights and have not powered down the gateway.
    ​

Note: This is a hard reset. Please work with the SmartSense Support team before performing.

Shutdown gateway power cycle

The power cycle is used to completely turn off your device to troubleshoot issues.

Note: This is a hard reset/full shutdown of the gateway. Only proceed with these steps if you wish to do a hard reset.

  1. Press and hold the power button (located on the side of the BZ Gateway).

  2. After 8-12 seconds, a red LED will illuminate.

  3. Release the power button. Your BZ Gateway is now turned off.

  4. Wait 2 minutes before continuing.

  5. Press the power button to turn the BZ Gateway back on.

  6. Monitor the LED activity for the next 30-45 seconds to confirm the Gateway remains on.

LED Reference Guide.png


If everything is functioning as expected, you can proceed with installing your BZ Gateway.

מאמרים קשורים
האם התשובה הזו ענתה על השאלה שלך?